10 Reasons Your Viking Stove Pilot Won’t Turn On and How To Fix It

April 4, 2022
Home » 10 Reasons Your Viking Stove Pilot Won’t Turn On and How To Fix It

Isn’t it annoying when you find out that your pilot switch won’t turn on? You’ll have to get a Viking stove repair from Viking Appliance Repair Company in Pomona. Repairs are inevitable, but if you are not prepared for a repair, this could cause more problems than solve one. So, it’s better to know how to fix a pilot switch before you jump into repair service.

You can easily replace the pilot switch, but if you are not comfortable with the repair, you can avail of the services of Viking Appliance Repair Company in Pomona. But before you call them, you can learn why your pilot switch is malfunctioning. We listed 10 reasons that cause this problem.

1. You have a malfunctioning thermocouple.

A thermocouple is a sensor for temperature. If your thermocouple malfunctions, it could affect the pilot switch, and your pilot won’t light. The best way to go is to have a professional check it out and replace it if needed. This way, you are sure that your pilot will turn it on after the repair.

2. Your thermocouple is dirty.

If your thermocouple is dirty, it won’t detect the temperature of your stove. Therefore, it won’t signal your pilot to turn on. So, always take the time to thoroughly clean the thermocouple and avoid further problems with the switch.

3. Your thermocouple rod may be positioned incorrectly. 

If your thermocouple rod is too high or too low, you won’t be able to turn on the flame. You should level it with the pilot head to ensure the flames reach the head and turn on. You can easily adjust the rod, but if you want, you can also ask for professional help to ensure nothing else gets damaged.

4. You have a loose thermocouple connection to the gas valve.

Check the connection between your thermocouple and gas valve. If it is loose, then gas won’t be able to flow through the connection and up the thermocouple. You can tighten the connection by reading your user manual or watching tutorials on the internet for a step-by-step guide.

5. You have a malfunctioning solenoid.

Check your solenoid to see if it’s working properly. If not, ensure that you have it repaired or replaced by an experienced technician. Although solenoids may look small, they are essential for your pilot switch to function correctly.

6. Your gas pressure is low.

You might have adjusted your gas pressure if a blockage makes gas pressure flow slowly. If this is the case, don’t hesitate to get help immediately. Dealing with gas tanks can be dangerous for people who have no experience. So, get expert help and have them deal with your gas pressure. Then, you can try to switch on your pilot again.

7. Your pilot tube is clogged.

The pilot tube is where the gas flows through so you can get a flame to turn on your stove. If the tube is blocked, your pilot switch won’t turn on. Ensure you get a good view of your pilot tube and remove any blockage that prevents gas from passing through. If you’ve done this and still can’t switch on your pilot, you’ll need a professional technician to check on it.

8. You could have turned your manual gas valve off.

Sometimes, we forget that we switched off the manual gas valve. Check on your gas valve and switch it back on if this is the case. Then, you can try to open your pilot again to see if turning the gas valve switch is the reason behind your pilot switch problem.

9. Your pilot head is bent.

If your pilot head is bent, the flame won’t reach your igniter, and it won’t turn on. Check if your pilot head is bent and move it back up with pliers. Again, if you are unsure about what you’re doing, you can call in for help.

10. Your area is windy.

If you place your stove in an area where wind can come in or if you have air conditioning and a fan, even if you try to start a flame, it will just die down. Place your stove somewhere with minimal airflow to ensure that your flame won’t die down.

These reasons can be fixed in no time, but ensure that you learn how to do these steps correctly. Viking Cooking appliances are perfect for when you want a professional setting in the kitchen, even at home. But, we can never avoid malfunctions, especially when we use the appliances for years.

Therefore, when purchasing a Viking appliance, ensure you have backup repair services for maintenance and checkups. Viking Appliance Repair Company can help you maintain the performance of your Viking appliances.


If you have trouble lighting your Viking stove, let Viking Appliance Repair Company help you out. Call us today for hassle-free and affordable appliance repair services!